W/UV Liquid Adhesive Light, Full Edge 3D Curved Tempered Glass Film Installation Guide

 
Warm Tips:

1. must keep it in the indoor without any ultraviolet rays or sunshines when installing tempered glass.(Because the UV glue is easy to be solidified under the ultraviolet rays, the installation will be failed)
2. Make sure to keep the phone on the leved surface
3. Make sure to use the guide label to stick the earpiece speaker hole for avoiding the glue spilling into it,and remove the guide sticker when the film is affixed.
4. Must keep the screen surface clean with our wipes before dropping the glue.
5. Please follow the installation video and make sure the glue squeezed out with long line shape (if there are bubbles, need puncture it.).
6. Please don't raise or press this screen protector when you installing, otherwise, will be fail. (the failed installation tempered glass could show like those situations: "cloudy "/"splotchy"/“air bubble”/"glue pattern" and so on...)
7. Need make sure use this UV light to dry the screen glue and keep it for at least 60 seconds, until the glue is full dry. ( in order to keep the glue fit better,must irradiate the four corners and all of edges above 120 seconds again)
8. Each tempered glass film only need one uv glue.